If you decide to replace the entire set of tiles in the bathroom, the first thing that you need to do is scrap off the existing tiles with a floor scraper. It is easier to do so by hitting the tiles with a hammer in the center. Once the old bathroom tiles have been removed, properly scrape out the adhesive that was used to fix these tiles with an angled steel head tool.
Subway. Subway tiles may very well fall into the retro category; however subway tiles have remained one of the most popular shower design options for over half a decade. If applied correctly, shower tiles are the most seamless and clean-lines options available. Want another reason to choose subway tiles for your shower re-tiling? They are by far the most cost effective shower tiling solution.
bathroom renovation companykitchen and bathroom remodelingsmall bathroom plansbathroom renovation contractorToothbrush Holdersindian bathroom designssmall bathroom makeoverstiny bathroom remodelbath matssmall bathroom updatessmall bathroom designs with bathtoilet and bathroom designsmall bathroom layout ideasbathroom ideas on a budget1-sink vanitiessmall full bathroom ideassmall bathroom design ideassimple bathroom designs for small spaces
If you are thinking of replacing your old bathroom tiles and give it a completely new look, the task is not only tough, but also time consuming. The easiest way to get this done is by hiring professionals. But if you choose to do it yourself, you need to have the required care, patience and dedication. Let us try and understand the basics for replacing bathroom tiles.
Choosing The Right Type Of Tiles. Your choice of bathroom tiles should reflect your personality, but they must also be suitable for their purpose; that is, they must be practical. Ceramic tiles are always a safe choice. They are slip-resistant and easy to clean as they are non-porous.
From this point, you will be working on fixing the new set of bathroom tiles. Remove the toilet pot by unscrewing the setup. Make sure you have the entire floor cleaned. You can do it by using a disposabl scraper and paper towels. More often than not, all the tiles will be of the same size.