Measure the area of the bathroom and then calculate the number of tiles required to re-do the area with the new tiles. You will obviously need to cut some of the tiles to make them fit near the sides and corners as the area will not be as per the dimensions of the tiles. While you are cutting the tiles, be careful not to damage them. Get a good tile-cutter for this job.
If you decide to replace the entire set of tiles in the bathroom, the first thing that you need to do is scrap off the existing tiles with a floor scraper. It is easier to do so by hitting the tiles with a hammer in the center. Once the old bathroom tiles have been removed, properly scrape out the adhesive that was used to fix these tiles with an angled steel head tool.
ceramic tile paintrecolor tileRobe Hooksresurface ceramic tile floorchange tile colorcover ceramic tile floorSoap Dishestile reglazing colorschanging tile grout colorpainting porcelain floor tilepainting ceramic tile backsplashbathroom tile refinishingresurfacing bathroom tilesbathtub spray paintbath benchesbathtub refinishing costbathroom tile paint ideascan you paint bathroom tile
The Diagonal. For those people who are looking to deviate from the norm, the diagonal is the usual favorite. This design entails a different way of laying the tiles on the floor. As the name implies, it is all done in a diagonal fashion. This, by itself, is a good bathroom tile design and can be used with one type of tile.
Start Installing Your Tiles. This is the last step. In this step you should spread some adhesive onto the floor. Position the tiles and cut them around the corners of the room. Use your gloves so you do not get too messy. Put a tile separator in between as you wait the adhesive to dry up. After that, remove the separator and spread the grout. Let it dry and you are ready.
From this point, you will be working on fixing the new set of bathroom tiles. Remove the toilet pot by unscrewing the setup. Make sure you have the entire floor cleaned. You can do it by using a disposabl scraper and paper towels. More often than not, all the tiles will be of the same size.